Questions & Answers for: pioneer elite blinking red light

...Elite will not power up The mcacc light is flashing on and off (red) no functions on the receiver will work. i have tried unplugging it as well? Any ideas or history? Jim i do have same problem MCACC ...

pioneer elite 50 plazma tv heard a loud double bang like a gun shot----no picture or sound--red light blinks 5 times this is a power supply.. you have to replace the board to fix. price depends on ...

...blinking under phase shift. Pioneer FAQ says it could be the speakers don't have the right impedance, but they're all 8ohms, like they should be. This might not be any help to someone else, but I ...

...Pioneer Elite PRO and one of children threw the remote, hit the screen and cracked it. It looks like it is cracked inside (beneath the first layer of glass) The outer sheet of glass is not cracked. ...

...(red not blinking) Prod.info:Pioneer Elite TV PDP-4340HD which comes with a Media Receiver PDP-RO4U and Remote control AXD1478 ....Thanks Any luck with this? I really need this information as

monitor does not display have blinking red light Plasma's have a High Voltage board. Sounds like you don't have any High Voltage! May have to go in to get serviced. 

Pioneer Elite 1140 HD not working : reds light blinks 4 times Four blinks of standby light to Plasma TVs, denotes a voltage output failure from its main power regulator board. Check this link for more

Red light blinking How many times do this standby light blinks at one time switch ON? These blinks are fault indications. From the number of blinks occur at one time switch ON, you can get an idea ...

Pioneer Elite Pro-1139 HD Tv has no picture but has audio. Red standby light is blinking 10 times then pauses. Back - light problem. Check and replace damaged component/s at its back-light inverter ...

...Pioneer Elite 50 inch plasma. Blue and Red lights blink and no screen. Model Pro-506PU. Can someone help These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at ...