...PIONEER-WIRE-HARNESS-DEH-P8400MP-DEH-P8600MP-DEH-P960MP_W0QQitemZ190037675247QQihZ009QQcategoryZ39752QQssPageNameZWDVWQQrdZ1QQcmdZViewItem#ebayphotohosting ------ copy and paste this. i hope this is ...
pioneer p8400mp hi ive just replaced both ribbons and the cd player is not doing nothing but if i take the top off and winde the face down my self it will come on then strait back off please could u ...
...Pioneer DEH-P8400mp Hi, my name is Aldo, I´m form Buenos Aires, Argentina. I was wondering if you could send me the instructions for changing the ribbon cable because I have it but without the ...
Pioneer DEH-P8400MP. I get no sound out of the ISO speaker connector, only out of the RCA outputs. This told me that there was a problem with the IC Amplifier (a PAL007A I believe). A quick check with
...Pioneer DEH-P8400MP. The guy told me that id did not work no more and that the problem should be the whire to the front plates. Now i habe installed new whires but it still won´t come on.I have ...
unit is dead, loom is 100% i am getting power at the circuit board, any stock faults please? one or both of the flexible cables going to the faces may be bad.
...pioneer DEH-8400mp. When you press the OPEN button which drops the front faceplate, the rear display turns off, and none of the buttons do anything. Can you help? It is the failure of the flexible ...
the second screen which displays the equalizer is not working so i am not able to adjust highs lows etc there is a flexible cable which goes from the face to the main motherboard that is probably bad.
...pioneer deh-p8400mp car radio Hi, Here is the wring harness colour code for Pioneer.Yellow= Constant 12VRed= Switched 12VBlack=GroundBlue=Power AntennaBlue/White stripe= Power Amp ...
Need pic of 16 pin wire harness for pioneer CD player DEHP8400MP PLEASE http://www.nodevice.com/user_manual/pioneer/car_electronics/deh-p8400mp.html There ya go
Usually answered in minutes!
687 Questions
481 Questions
236 Questions
236 Questions
240 Questions