Questions & Answers for: Canon imageCLASS pinch roller

paper jam saying paper jam but I do not see any paper stuck in the rollers What that sounds like is misfeeding. Remove your paper tray and take a soapy cleaner, like formula 109 or fantastic and ...

hot roller/fuser roller my machine is not working properly on one side of the copy you can smear off the toner and a piece of film came off with a copy. I know that it is a roller that gets hot they ...

Paper jam in front roller of imageclass D880 (about 1/3 inside) dirty pick up rollers. take the paper tray out and them you will see 2 half moon rollers, clean them with alcaho and you will be ok.

...pinch roller assy, these foam peices lose their cushion and don't put enough pressure on the pinch rollers. Rather than order through MNf. I bought 10 feet of 3/8" wide 1/4" thick foam door/window ...

copies and faxes double images how to solve copies and faxes are coming out with double images I have cleaned the rollers put an old or new toner cartridge in it to see if the double imaging goes away

the feed roller from the fresh paper into the machine to be copied does not seem to be working. I did have to disassemble my copier for a jam in the copier roller section. I found a year old page that

Paper jammed at exit rollers of Canon D860. Paper Paper jammed at exit rollers of Canon D860. Paper torn off so cannot get out of the rollers. Rollers too tight to release paper. Any suggestions on ...

imageclass mf5530 jams from paper tray, bypass Canonj imageclass mf5530 jams from paper tray, bypass works ok Clean the pick up roller, try to see where is stuckes. In some cases the roller holders ...

how to i clean the drum - there is a mark every few inches when i print If the mark is persistent on each page and repetitive with very precise spacing, you need to determine which roller it's coming ...

How to install the Canon paper feed roller with item number RL1-0266-000 The paper feed roller in that model doesn't work properly. So I uninstalled it(the roller), and found nother wrong. So ...