Questions & Answers for: Canon DR pinch roller

Canon DR-2080c - Replacing rollers I have a Canon DR-2080c (connected via SCSI) scanner. The scanner is a little older and now is grabbing multiple pages at once. I think the rollers rollers inside ...

9080c fails to scan single page; has trouble scanning a batch. 9080c will scan a batch of documents but sometimes will fail to feed a page in that batch. The scanner is not jammed, it is just that the

What do you recommend as a cleaner for the pick-up rollers? We have been using it for about 6 months and the pick-up of pages is getting touchy. if you can remove the rollers, then soap and warm water

...the roller. You open up the scanner using the pinch tab on the front and lift the lever that holds the rollers and pull them out to replace them with new ones. New rollers can be purchased on

Paper Jams - Multiple Pages Pulled - New Rollers Installed We have a Canon DR7580 scanner. We continue to have paper jams due to more than one page being pulled in at a time eventhough we just ...

the scanner works but makes a grinding noise that is getting worse Normally Canon scanners work well for long time, Change the pickup rollers for every 250,000 pages and check other rollers for every ...

canon dr-6080, captureperfect 3.0 software. images are distorted, sometimes the scanner doesn't recognize an image even though one was fed through. I don't think it's a software issue. I notice it ...

Having multiples feed even after replacing roller kit, If i put a little preasure on the top cover it will work fine any ideas?? Try rotating the sep roller backwards to reset the planetary gear. 

The DR-9080c scanner will take a whole stack of papers (20 or so) and shove it thru the paper path, not just the top sheet. On old laser printers there was a paper pick that got slippery. Is there one

The front rollers on the scanner will not come down. I can scan by adding more papers to the stack so the papers reach the front gray rollers. I have tried cleaning the rollers and spraying it with ...