Questions & Answers for: pinch roller Crafts & Hobbies

...pinch roller is not making contact with the capstan. THis is exacly what happened to my 1800 after sitting for a long time with no use. THe solution was to manually excersize the lever going to the ...

...pinch roller for this. I put the pinch roller back where you pointed out and everything worked fine. The problem is the pinch roller won't stay on. I wanted to see what is missing so I can try to ...

that snaps in the top of the pinch roller? # 763 is different thing, a roller fixed under pinch lever pin for smooth run. # 760 is complete pinch roller assembly including snaps on top of pinch roller

clean the pinch roller at the back of the printer using a cleaning sheet. These come with packs of Epson Photo Paper and are slightly tacky which removes the paper dust and grime from the pinch roller

...pinch roller...(you may have to remove the front metal deck face to fully access the swinging pinch roller mechanism) ) . do NOT get any oil on the rubber pinch roller..(best to make sure after by ...

...pinch roller sping. I received the spring but cannot figure out how to place it. Can you provide help? Hi, I'll try to help you to install that spring with pinch roller, there is no service manual ...

...pinch roller Why do you want to change the Pinch Roller? Most of the time they just need a good cleaning and other things in the deck like back tension checked. Pinch Rollers are only changed if they ...

pinch roller for Sony DCR-TRV19 handycam camcorder? Pinch roller fell out and lost I had a similar problem that happened to my old Betamax camcorder. The only way that the pinch roller can be replaced

...pinch roller problems. The pinch rollers are the little black rubber wheels. The pinch roller 'pinches' the the tape against the capstan (silver metal pin nearby). The capstan spins slower than the ...