Pinch roller in the VCR. It is cheweing up the lower edge of the tape, and therefore the VCR is not able to process the 'Control Track. All you need to do is replace the Capstan / Pinch roller.It is a
...pinch roller have build up on there. It could be that the motor isnt feeding the tape up against the recording heads properly and may need an adjustment. If you can take the top cover off, you should ...
...the error code on your machine, and if you replaced some of the fuser parts already you might have pinched the ribbon cable by the ...
Question about NV-DS50EN Mini DV Digital Camcorder
...and i don't know what do tdo to stop this pb. help me please. Please check pinch roller.if it is dirty clean it.or it is hard please repalace it. please clean capstan shaft' please repair by ...
...meets the pinch roller ( a small black roller on the right side)? If so the roller is either dirty or worn & would need to be replaced, this will cause your tape to crinckle & damage the
Question about In-Dash 7" Wide Color LCD TV/DVD Receiver CQ-VAD7300U Car Video Player
why does the cds get stuck inside the in-dash panasonic tv radio?? the pinch roller may need to be cleaned. it is advisable to clean it with a rubber restorer if you plan on trying to do it yourself.
...PINCH roller which exerts pressure with the tape on to the CAPSTAN to pull the tape at the required speed. The capstan speed is servo managed and the pinch roller assists with the given pressure on ...
...pinch roller with your finger, it does not stop as expected. The auto reverse switch also does not seem to function (I have not tried it with a cassette in for obvious reasons). When's the last ...
Question about RX-FS470 Cassette Boombox
...damage or the tape may be wound up on the pinch roller if your cassette is not needful, cut the reel and pull it, after taking out the cassette out, the remaining piece of tape remove from the
Usually answered in minutes!
627 Questions
462 Questions
520 Questions
406 Questions
457 Questions