...but it doesnt seem to work. can u help me with this? In rare instances it is sometimes the 15 pin connector that connects on the computer end. Could be at the monitor end of the same cord, if
Moniter Black - Buttons not responding I just recently moved my monitor back home, and when I plugged it in this morning, the blue light came on in the front saying there is power, but there is no ...
X2Gen Monitor speakers not working speakers not working This sounds like a straight hardware issue. However, to be certain, try to attach another monitor to this PC, and if it works properly, you will
x2 gen monitor at first the monitor said no input when the computer was on when I unplugged the cord and plugged it back it it now has a box that says burning.... bouncing around the screen like a ...
X2Gen MW19U: Start "Auto Adjusting" Hi, My X2 Gen LCD montior is stating "Auto Adjustment" every 1 minute. Though we are not touching any botton it start "Auto Adjustment". I checked manual and set ...
Monitor comes up white on computer start up I leave my monitor on "on" (green light) and it goes to "standby"(amber light?) when computer is turned off. Problem is recently the screen is all white on ...
after connecting to new computer Check the VGA cable (cable between PC and Monitor - check that the pins are not bent - that's often an issue - that can cause display issues and the pins are very easy
screen comes on gray with bars and then turns white. after several reboots it works. the fault is that your monitor gets to work after the set gets warm.so the possibilitty that some components are ...
the monitor is registering no signal No signal is not a problem with the monitoe unless the cabe is disconnected from either the PC or the monitor ends. If the cables is securely attached at both ends
pin conventional plug or a RIBBON CABLE. The worst case is if the problem is a ribbon
Usually answered in minutes!
168 Questions
48 Questions
29 Questions
18 Questions
9 Questions