Questions & Answers for: Frymaster Dean pilot light

...light the pilot. Continue to hold the knob in for about 60 seconds after the flame appears on the pilot. Release the knob. The pilot should remain lit. I suggest that you boil it out before using. ...

...light the Pilot but a) don't know where to put the flame to light and b) not sure if the instructions listed on the inside door for lighting the pilot would pertain to propane. Use the lighting ...

...pilot light should remain "ON" all the time. It is not intended to ever go off, unless you are not going to use the fryer for several months at a time. Then you can just shut off the propane which ...

...the pilot orfice is blocked and what it need is cleaning the pilot orfice. If the pilot light is on but goes off when you release the button then the thermopile need to be changed. Hope this can

...pilot light will not stay lit. I have replaced the thermocouple and still will not stay lit. Can the valve be bad? Make sure the thermocouple is deeper into the flame of the pilot light. It needs to ...

...pilot light will not stay lit. I hold it for well over a minute, but it still does not stay on. The flex-hose, quick attachment in back was from an older fryer and is a little worn, but I don't smell ...

pilot light switches off automatically hi, first sorry for my bad english, i have dean sr42gn fryer and when i turn the pilots light on and set the thermostat on 300 work fine but some times( 4 5 time

pilot light lights but is a low flame There is an adjustment screw on the main gas valve, usually under a cover screw. It will be near where the small pipe that goes to the pilot light. If you are ...

Pilot light will no ignite when I follow steps on door. What may be the problem ? Defective thermocouple. If it pilot light goes out after letting go of the button, the thermocouple is not producing ...

...pilot light will light the unit will come on when the thermostat is set and will come to temperature but for no reason will blow the flame out and the pilot as well. The flame sensor is weak . This ...