Questions & Answers for: GE pierce

Hissing freezer Hi i have a fridge with a small freezer compartment at the top,while defrosting it i accidently pierced a small pin sized hole. now its making a hissing noise can anyone help me? ...

low flow on ge profile side by side water dispenser why does it take so long to fill a glass with water from the dispenser? is there a way to boost the water pressure? the water filter may be clogged

slow ice maker,poor water dispencer flow i've had slow water flow since i installed this refrigerator. now its making ice very slowly.i've replaced the filter,and i even tried bypassing the ...

My water dispenser stopped working, so I replaced the filter and all appeared to be fine. A few days later, water began dripping from the dispenser, down the front of the freezer door and into a ...

How to you put freon 134A into a GE side by side? You will have to install a valce to hook up the hose from the can. A piercing valve is what is typically used. ...

stopped making ice after water had been turned off and turned back on turn water off to ref disconnect the water supply line to ref put the supply line in a large bowl or bucket the turn the water on ...

my fridge will not make ice or water Check the water supply line going to the ref to see if you have water usually if the water inlet valve is bad you will have water coming from the door dispenser ...

no water coming in the washing machine Make sure the tap is working as sometimes the leaver turns but not the valve. If the tap is of the type that pierces the pipe then the steel pin can rust up ...

Ge Profile Arctica water will not dispense into ice maker. Water will not dispense into ice maker. It does dispense into the door. Ordered a new ice maker, but nothing changed. Water will flow in for ...

I have a ge top freezer refridgerator and the compressor is cycling constantly and it's not staying cold. Its a new fridge and hasn't been in use long. What would make it do this? Hello Bradley Miller