Question about 55HDT51 55 in. HD-Ready Plasma Television
...height of the screen. The line is about the width of a Sharpie pen and blue color. The line appears in both broadcast and DVD source material. If the TV is turned off for several hours, the line will ...
Question about 57SWX20B 57" Rear Projection Television
...picture would end up looking normal height on the left and right sides of the screen, and pinched (shorter) in the middle. So I've stumbled onto this website (nice job, FixYa). I entered this basic ...
Question about 46F510 46" Projection HDTV
picture on screen ....can I adjust verticle ??? You can adjust vertical height through the service menu, but i would recomed that you trouble shoot the vertical section as its probably a solder joint
...and their's no way to adjust the height of the picture on the plasma TV sets. I told them it's something they should consider. My $300 plasma montor can do it so why can't a $5000 TV? He
Question about 53SBX59B 53" Rear Projection Television
...height was not stable and was slowly collapsing (falling down the screen) , after a few min the screeen collapsed into an eye shaped collage of colors then the tv lost picture then came back then off ...
Question about FDX Series 43FDX10B 43" Rear Projection Television
Picture too big for screen. picture seems to be to large for screen, both width and height (was just height but I broke that too now). go to menu and adjust screen size(picture size)
Question about FDX Series 43FDX10B 43" Rear Projection Television
...picture lines up. Please be sure to remove the entire white heat sink compound on the heat sink and apply an even coating over the back of the new IC?s. You should also bolt them down before you ...
Question about FDX Series 43FDX10B 43" Rear Projection Television
...picture (height) be adjusted. The picture on the screen is too tall (vertical) and this cuts some of the top and bottom off. On a Hitachi set I had there were vertical ht adjustment knobs on the back ...
...picture being cut off. Is there something we can do to adjust it? Have you tried changing the aspect ratio? On your remote there should be a button labled aspect. Otherwise you'll need to access the ...
...THE LI9D103 USE AN ADAPTOR? I could swear this model used an adaptor even though I don't find it pictured in the handbook. I just moved and can't find the adaptor and am beginning to distrust my ...
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions