pickup and feed roller on one side. This happens when rollers dry out and actually shrink as a result. To resolve this, all we need to do is 'rehydrate' the rollers. There are solutions you can buy to
Question about Stylus Photo R1800 InkJet Printer
...pickup roller for the printer. But cleaning will work for the short term. What happens on most printers is the roller gets very smooth from normal use and then won't pick up the paper for the rest of ...
...pickup roller for the printer. But cleaning will work for the short term. What happens on most printers is the roller gets very smooth from normal use and then won't pick up the paper for the rest of ...
Question about Stylus DX6050 All-In-One InkJet Printer
...the printer. Roller start to pull in the paper but one side is blocked causing to start to enter at an angle and the jamming after 1cm in. please clean the paper pickup roller and check paper ...
Question about Stylus CX4800 All-In-One InkJet Printer
I have yet to see a dry, aged or cracked pickup roller, even 15 years in the business. I think that's because it takes longer to age and crack a rubber roller than it does to just wear out the machine
...culprit. Another possibility is one side of a dual pickup roller (two rollers on a single shaft) is worn out. That is unlikely; except for large format units most printers use a single pickup
...wont feed! (epson 830) Hi This looks to be a problem with the paper pickup roller. Hence use a little thin Photo paper or replace the Pickup roller and also the Paper feed toller (Long black roller
...pickup roller usually has one or more rubber 'rings' around the roller to grab & feed paper by friction. If all else fails, open cover and inspect gearing to roller, broken brackets which can ...
Question about Stylus CX4800 All-In-One InkJet Printer
...stops, either the first paper feed roller past the pickup roller may be at fault. Also check to see if the paper sensor between the paper pickup roller and the first feed roller is working
Question about Stylus CX4800 All-In-One InkJet Printer
...pickup roller You don't unless they need resetting. In which case you turn the roller by hand until it clicks. Apart from that the only maintenance is to clean them with a soapy cloth so it remains ...
Usually answered in minutes!
1,911 Questions
664 Questions
510 Questions
454 Questions
438 Questions