...pick up and was repaired 3 weeks later...3 months now and still works great!!! Tech said SC board was bad,and also said that there have been "some" repairs on these sets,but for as many of these sets ...
...3/12/2009,2.0 [Manufacturer] %Mfg%=Models,ntamd64 [Models] ; USB scanners "Minolta Scan Dual II" = USBScanner,USBVid_0638&Pid_026a "Minolta Scan Dual III" = USBScanner,USBVid_0686&Pid_400d ...
Question about Dimage Scan Dual IV Film Scanner
...3/12/2009,2.0 [Manufacturer] %Mfg%=Models,ntamd64 [Models] ; USB scanners "Minolta Scan Dual II" = USBScanner,USBVid_0638&Pid_026a "Minolta Scan Dual III" = USBScanner,USBVid_0686&Pid_400d ...
...pick, the player continues to "fill" my screen. Please help. Thanks, Ken Bannon i had the same problem. i see this post was from a couple months back, so i'm not sure if you've solved it yet. Also, ...
...3 mounting screws that hold the boiler in place, remove them, be sure to take hold of the boiler before removing the last mounting screw. Remove and replace the wires and 2 water hoses (w/clips). The ...
Question about Pebble 3 ID Card Printer Package (P/N MIDS-E-SC)
...3 says feeder error but there is not. It won't pick up a card when you try to print but when you press the push button it feeds out a card without printing. It will alos not print a test card. You ...
Question about Dimage Scan Dual IV Film Scanner
...3/12/2009,2.0 [Manufacturer] %Mfg%=Models,ntamd64 [Models] ; USB scanners "Minolta Scan Dual II" = USBScanner,USBVid_0638&Pid_026a "Minolta Scan Dual III" = USBScanner,USBVid_0686&Pid_400d ...
...sc.rr.com Check pin 60 for 4.9V, this is the reset signal to the chip. I am assuming that you have +5 at pins 3 and 4 since the oscillator is running. If these are ok, then I would suspect a possible ...
...had a close up and background button - which was a sensitivity setting - and the background setting picked up EVERY sound from miles around and filled the tape with noise. The close up setting only ...
Question about Dimage Scan Dual IV Film Scanner
...3) Create an empty folder on you harddrive (for instance go to my computer, double click on the c: drive, then right click and create a new folder named newminolta). ; 4) Open Notepad, Copy/save the ...
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions
