Questions & Answers for: Bulldog Security where is the pi button

After installation my starter has been replaced twice (within 2 months)- the only 2 times I used the stop button It is possible that the Tach/RPM monitor circuit (an integrated system that informs the

...You will need to take the unit out of safety mode, to do this you will need to ground the hood pin switch wire, then put your foot on the brake, next hit any button on the remote and the

model rs1200 w/791 bypass hit start button runs 3 minutes then dies,starts by it self runs 3 minutes dies, starts by its self runs 3 minutes dies, use key starts & runs fine check your ...

I bought a used truck with a bulldog remote starter in it but the guy has it set to start when it reaches a -10. I want to reset so only starts when I hit the button. The key fob looks alot like the ...

My remote starter is not responding. The antenna signal is not appearing on my two way remote. press the "f" button 2 times then the lock button, if this doesn't work and you know how to open the ...

...or power windows, did not connect red&black#2,blackwhite#3, &black white #3 wire from the 9 pin harness. After making all connections the parking lights will flash about 5 times and stop. ...