Questions & Answers for: photo eye


Question about GE Hardware & Accessories

1 Answer that automatically turns lights on at dusk. And then lights remain ON until set-time expires, or dawn arrives. Timer automatically turns off at dawn, no matter which setting, unless timer ...


Question about Electrical Supplies

1 Answer

photo-eye is exposure to direct sunlight. Intermatic makes top quality photo-sensors:


Question about 200W Power Pack With 12v Transformer ML200RT

1 Answer

photo-eye to power pack, the wiring is changed from what shows in power pack manual: Open following links for power pack resources: http

Question about LC4535 Photo Cell Control 480 V 50/60 Hz. 1000 Watt "T" Locking

1 Answer eye connected to lamp that is also connected to neutral wire. Your 480V has 2 ...

Question about K4121C Photo Cell Control 120 V 50/60 Hz. 1800 Watt "T" Stem Mou

1 Answer 1) Put black tape over photo eye and see if lights turn off. Do not expose photo eye to direct sunlight. Turn photo eye away from possible source of light at night. 2) Wiring is suspect. ...

Question about T1471BR Timer 4PST 40A 125V T-SW

1 Answer

photo eye on input voltage from breaker box, because that will stop timer clock from operating except nighttime, and then clock time will be off.The timer clock terminals are A and B, so Connect white instructions, general troubleshoot, manuals, replacement trippers, and tips to prolong life of power pack: 2) Brand and ...

Question about T1471BR Timer 4PST 40A 125V T-SW

1 Answer eye? Photo eye has been rewired with contactor to reverse operation? Add a comment with more information. Copy following link for wiring and troubleshoot: ...

Question about Malibu 300W Power Pack Transformer ML300RTW

1 Answer eye on it. The instructions for the photo eye as well as recent IFU from Malibu show 3 connection posts, A, B, C. Our transformer has 4. What do we hook up for the photo eye? How about this ...

i have a rite hite fast trax cl door that is showing a photo eye fault I replaced all photo eye and checked all wires why is it still showing a photo eye fault Defective receiver board.

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Hardware & Accessories Experts

Brad Brown

Level 3 Expert

18666 Answers

Tom Chichester

Level 3 Expert

61759 Answers

ray gallant

Level 3 Expert

72251 Answers

Are you a Hardware & Accessories Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides