Questions & Answers for: philips tv stand screws

Question about Philips Televison & Video

1 Answer

philips lcd hdtv the stand should be attached with some screws right where it connects with the TV. Carefully, lay the TV screen down on your bed and look for those screws on the back bottom somewhere

Ad

Question about 50PFP5332D 50 in. Plasma Television

1 Answer

philips and they sent me a bag of screws that don't fit. I called again and they have no other screws that fit. According to the assembly instructions that came with the set (and in the unopened box),

Ad

Question about LCDTV26 26 in. Television

2 Answers

TV stand can be removed by removing the access cover to your input connection. There are eleven black phillip-head screws. The three bottom screws also hold the plastic base cover in place. Remove all

Question about LCDTV26 26 in. Television

1 Answer

philips scredriver to unscrew it. Try lying the front of the tv flat (make sure that the surface is padded, so as not to damage the tv) when you unscrew it, or even lie it upside down just to take out

Question about LCDTV26 26 in. Television

1 Answer

...stand, I have the parts that came with the TV but no instructions. Very easy to attach the base.Just put in the base in long square whole matches up all the screws holes and put in like 4 Philip ...

Question about 42PFL5332D 42 in. LCD Television

2 Answers

...TV STAND OFF A UMC UX26A TV Check the tv back cover at near around the base stand area.Lacate all screws near or at the base stand,spray some WD40 in each screws holes and wait like around ten ...

Question about LN46A530 46 in. LCD HDTV

1 Answer

...tv unit at bottom base hole and make sure all the screws holes lines up.Put in those holes with 4 or more philips screws on those holes and now just used a philip screw driver turn it clockwises to ...

Question about 37LX96 37 in. LCD TV/DVD Combo

1 Answer

...the tv down to flat cushine surface like a bed maybe.Take all the tv Philip screws out of the base stand,give it a little tuckles like fordward or backward of the tv base stand will come wright

Question about LA40A450 40 in. LCD TV

1 Answer

...tv base stand wright?U have a Phillip screw driver wright?Just put the base stand into the tv make sure all the screws holes lines up between the tv and the base stand holes.Than just tighten the ...

Question about LA40A450 40 in. LCD TV

2 Answers

...TV and remove the 4 Philips head screws. Once the screws are removed, pull the stand away from the TV. The base can be removed from the stand body by removing another 4 screws that are at the top of ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Cindy Wells

Level 3 Expert

6688 Answers

 Grubhead
Grubhead

Level 3 Expert

5755 Answers

Are you a Televison & Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...