Questions & Answers for: Fisher and Paykel phase 10

Question about Fisher and Paykel Washing Machines

1 Answer

...P mw511 washing machine, that stops and flashes a code 56. where do i start looking. 56. (00111000) Phase 4 to 6 - Basket Check No Valid Fault While carrying out a basket check, the machine has not ...

Ad

Question about GWL11 Top Load Washer

1 Answer

10 US model F&P washer. Most times the wash cycle "stalls" at the end of the 3rd light phase of the wash cycle and again at the end of the 5th light phase of the wash cycle. In each case the light

Ad

Question about WL26CW1 Top Load Washer

2 Answers

...you need to set the machine wash capacity like:5Kg or 7.5Kg.To do that please follow the steps: Phase 1 to 6 Size Switch Error The Display size switch setting does not match that stored in the ...

Question about WL26CW1 Top Load Washer

1 Answer

...You may have all the symptoms of a faulty main board. from my memory the main driving motor is 6 phase - normally one hears of single phase or three phase- anyway if a phase is faulty or open ...

Question about WL26CW1 Top Load Washer

1 Answer

...What is my most likely problem and what will it cost to fix it? Thanks! 136. (10001000) Phase 1 to 6 - Motor Stall The Motor Controller has been unable to start the motor. Possible causes ...

Question about GWL11 Top Load Washer

1 Answer

What is code 89? What is error code 89? 81. - 95. (0101xxxx) Phase 2 to 3 - Display/ Motor Controller. See fault code 106 104. (01101000) Phase 2 to 6 See fault code 106 106. (01101010) Phase 2 to 3 -

...comes on and beeps. Orange light on longwash and yellow/green lite on short wash 136. (10001000) Phase 1 to 6 - Motor Stall The Motor Controller has been unable to start the motor. Possible causes ...

Question about GWL11 Top Load Washer

1 Answer

...connectors and motor for shorts. This canbe done by taking a resistance measurement between phases of the motorharness at the Motor Control module end. Nominal resistance should bearound 12.2 ...

Question about GWL11 Top Load Washer

1 Answer

4,5,6,7 light up tech sheet missing what does this mean? Your Error code is 94 81. - 95. (0101xxxx) Phase 2 to 3 - Display/ Motor Control Module. See Fault Code 106 106. (01101010) Phase 2 to 3 and 5

Question about GWL11 Top Load Washer

1 Answer

error code 105 not working Info for Error code 105 105. (01101001) Phase 2 to 6 - Comms Error Time Out These faults are reported when the Display Module detects an error in the communications between ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Fisher and Paykel Washing Machine Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Fisher and Paykel Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...