Questions & Answers for: phantom power

Ad

Question about 48V Phantom Power Supply P11SPT Microphone

1 Answer

...phantom power ....i connected them and switch48v without any signals ....... if you have a volt meter check the supply is working correctly 48v dc phantom power should be found between these pins on ...

Ad

Question about EM100G2 RACK MOUNT G2 RECEIVER (B) EM100G2B Microphone

2 Answers

...phantom power turned on, this unit produces major static on the channel; as soon as the phantom power is turned off, the signal is clear and the receiver works fine. All of my other receivers work ...

Ad

Question about C747 Professional Microphone

1 Answer

...Phantom power unit at the end of my AKG C747? Hi,the switch for the phantom power on the microphone is to activation of the mic.Without the phantom being activated, the mic will not work. It can only ...

Question about Ultra Di-100 Active Direct Box Stage Di

1 Answer

...phantom power to work, so I bought the Ultra Di-100, but I don't know how to make my mic work with it. Sorry, but the DI-100 can OPERATE on phantom power, not supply it. If you have a mixer that has ...

Question about IM824 24 Channel Mixing Console IM8 IM8

1 Answer

...phantom power on. I had to leave the room for a while and when I came back, I noticed some rather severe popping in the audio. I turn off the phantom power, change to a different condenser, turn ...

Question about XENYX 2442FX Mixer

1 Answer

phantom power is on, some channels decide to come and to. Particularly with the SM57 mic Don't know what you are saying. Phantom power is only used for Condenser mics and a few DI boxes. Make sure

...phantom power? I need to hook a CAD M179 condenser mic. Or do I need an external source as well? I am hooking up a CAD M179 condenser mic for female trio vocals. No. A mix of the previous answers are ...

Question about ME66 / K6 Professional Microphone

1 Answer

Phantom Power Not working through K6 Hello. My sennheiser k6 power unit works fine with a battery, but won't conduct phantom power through it. I've tried different XLRs, made sure my ME66 works on a ...

...phantom power on a sound board. I was cleaning up this sound board, opened it up, and a cable for the phantom power became disconnected. It's a black cable, that goes to the upstream side of the ...

Question about C-1 Microphone

1 Answer

phantom power supply, and the phantom power LED is on. The phantom power is then connected via XLR to a Lexicon Alpha interface. From there, all I can hear is buzzing when the mic is connected, and it

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Audio Players & Recorders Experts

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

 Grubhead
Grubhead

Level 3 Expert

5700 Answers

The Knight
The Knight

Level 3 Expert

76466 Answers

Are you an Audio Players & Recorders Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...