Questions & Answers for: Sta Rite ph too high

Question about Sta-Rite Max-E-Therm High Effiency - Propane Heater - 333,000 BTU

When power to heater turned on r3 is displayed

thermal regulator may be bad, or worst case scenario, heat exchanger is blocked due to imbalance of ph/alkalinity in pool water. Good luck

Question about Sta-Rite Max-E-Therm High Effiency - Propane Heater - 333,000 BTU

1 Answer

I have a Sta-rite gas heater that has the afs and

...E SORRY YOU HEATER IS GONE THE HEAT EXCHANGER HAS ALEAK THIS IS DUE TO POOR WATER CHEMESTRY ,LOW PH, OR SOMEONE USING TABLETS ON THE SKIMMER THIS DAMAGE THE METALS ON THE ...

Question about Sta-Rite Max-E-Therm High Effiency - Propane Heater - 333,000 BTU

1 Answer

Shortly after it ignites it starts to make a

pH has been running high for any amount of time while the heater was running, the tubes may be filled with enough scale to cause water hammering and trip the high limits. The only way to know for sure

Question about 1 Hp Sta - Rite Abg Swimming Pool Pump

1 Answer

I have a a sta-rite

...high rate sand filter model T-200-BP-1....its leaking water thru the top of the valve, where the valve cover screws on the valve body assembly. it leaks water out where they go together around the ...

Question about 333 Btu Natural Gas Heater Maxetherm Sr333na

1 Answer

Sta Rite 333 Btu Natural Gas Heater Maxetherm Sr333na Leaks water and high copper in my water

...high copper in my water. Can this be repaired? It sounds like your water has either been running at a low pH level, or you have a salt system. Basically your heat exchanger coil has dissolved into ...