Questions & Answers for: Chevrolet Silverado 1500 pep boys

...Silverado 1500 Why would Pep Boys call for 6 hours labor to replace a oil pan gasket ?? Is there something i'm not wanting to get into ?? yes you need to partially remove the engine to get the pan ...

Ad

pep boys wants 900 to fix oil pan gasket how can i do it myself why does this cost so much and what are the procedures to change this gasket You need to get the motor up high to get the pan out, and ...

Ad

Question about 2001 Silverado 1500

2 Answers

...Pep boys, and get a free code scan. If not obvious by what codes come up, get back to us with the number(s) and we'll better be able to point you in right direction. Guessing now without codes would ...

Question about 2007 Silverado 1500 2WD

1 Answer

...truck , heard click and then had total loss of electrical power. Truck was running fine this afternoon. Battery was replaced by Pep Boys three weeks ago Battery or batt. post are loose or

Question about 2007 Silverado 1500 2WD

1 Answer

...anything but stabilizing. Check your fluid level, pad wear and condition of wheel speed sensors, wires and connectors. To be sure what the fault is have the code read at your local pep

Question about 2003 Silverado 1500

1 Answer

Pep Boys did a smoke test on it and they said it was something on top of my fuel tank that was bad. Something about a sensor on the fuel tank, then they said the part alone costs $200.00 and labor was

Pep Boys did a smoke test on it and they said it was something on top of my fuel tank that was bad. Something about a sensor on the fuel tank, then they said the part alone costs $200.00 and labor was

Question about 1999 Silverado 1500

1 Answer

...toward driver from dashboard) locate the light socket for transmission position indicator (PRND123) remove light and find replacement from local parts store (knechts, autozone, pep boys, Napa

...Pep Boys will check your car for free, and if it only comes on while running but not while driving that will steer you in the right direction. But I would try this first, reset the computer. To reset ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...