Questions & Answers for: pedal repair Sewing Machines

Question about Designer I

1 Answer

sewing machine is not working, but there is power into my machine. You may need a new foot pedal. Find a small applicance repair shop and ask them if they can test the pedal. Take the machine with you

Ad

Question about NX-400

4 Answers

...pedal needs repaired or replaced. This worked for us with the NX400 machine and I am sure the NX450 is closely similar. Don't bother to buy a Manual if you didn't already get one with the machine. A ...

Ad

Question about Ls2250prw Project Runway Lightweight Sewing Machine

1 Answer

...Is there a solution? you can take the sewing machine and foot pedal to a repair shop and have them check the foot pedal and they can tell you if you need a new foot pedal or if that one can be

Question about Ls2250prw Project Runway Lightweight Sewing Machine

1 Answer

..."run away with itself", operating at high speed of its own accord without any contact with the foot pedal. Switching off at the socket was the only way to stop it. I have since tentatively tried to ...

Question about Ls2250prw Project Runway Lightweight Sewing Machine

1 Answer

foot pedal husqvarna designer 1 not working Does the foot pedal go up and down or is it stuck in one position? The foot pedal is quite expensive so I would recommend trying to have it repaired if ...

Question about Ls2250prw Project Runway Lightweight Sewing Machine

1 Answer

...the machine. Disconnect it and then push it back on firmly. I have also had it happen when the Pedal was about to break. I had to go and buy a new Pedal at the repair shop and it fixed the

Question about Ls2250prw Project Runway Lightweight Sewing Machine

1 Answer

...out some of my other posts if you need more tips and info." http://www.thesewingforum.co.uk/showthread.php?t=29533 Old Singer foot pedal problem How to Repair the Foot Control on Your Sewing ...

Question about Ls2250prw Project Runway Lightweight Sewing Machine

1 Answer

...pedal plug. Can we repair or replace? My Elna sewing machine is a model number "C24 ELNITA 2.2". It was purchased in 1978. We smelled burning in the plug in the end of the foot pedal electrical cable ...

Question about Ls2250prw Project Runway Lightweight Sewing Machine

1 Answer

...does it mean? I don't know what to do make sure your foot peddle is fully pluged in. It's a foot pedal error code. Try unpluging your foot pedal and start the machine if it works without the foot ...

...a good idea to consult a sewing machine repair specialist to diagnose the issue and determine the best solution. They may be able to repair the existing pedal, or recommend a replacement if

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...