Questions & Answers for: Gestetner pcu

Our gestetner 3713 copiers toner tank is full ..How do I locate and empty this pull out the drum or pcu unit removing ne thum screw and open the recycling unit 3 screws clean the unit.

i replaced devoleper when i apply 2-214 initial setting "ERROR" message on screen you must reset the pcu unit. make sure connections are correct. you put the correct developer in?

reset pcu correctly Hi Thanks for using FixYa. It means that the photoconductor unit is not set correctly. You?ll need to reset the black or color PCU correctly. Match the green arrow at the tip of ...

...bottle? GESTETNER 2712 PROBLEM USUSALLY SIMILAR TO RICOH 2022/1022/27 PROBLEM IN WHICH INLET IN PCU AT LOAD TONER OUPUT. wHAT YOU CAN DO ,TEK OUT THE PCU IN CHECK IF THE PCU TONER INLET IS BLOCK ...

i have a gestetner 1312 copier it says reset pcu proprly.what does this mean. The PCU is the drum unit. It probably has just worked loose. Just unlatch it and shove it back in to make good connection ...

...to a current leak in the Charge Roller. The first thing i advise you to do is clean the plug of the PCU (fotoconductor unit) and of course the PCU. If you take out the PCU you will see a metallic pin ...

just changed black PCU but there are still black lines on the page Bad fuser

changed black PCU. Still getting black lines across the page Bad fuser or transfer

error code 500 dsm618d how do i clear this code or fix it The main motor is faulty or the pcu gears are damaged which have stalled the main drive, check pcu cam gear for free movement if ok replace ...

waster toner bottle on the machine, the waster toner is being recycled in the photo-conductor unit (PCU) so if the machine show replace the waster toner bottle just clean the PCU of the machine on the