Questions & Answers for: pcm wire

Ad

Question about 2004 Ram 1500

1 Answer

p0703 The PCM monitors changes in input voltage from the brake switch. If the PCM does not detect PCM terminal 1AU voltage changes while alternately accelerating and decelerating 8 times, the PCM ...

Ad

Question about 2003 Grand Marquis

1 Answer

where is the computer located/ You have to disengage the PCM (computer) wiring harness from the PCM as the PCM is removed from under the dash. The PCM connector is located on the firewall under the ...

Ad

Question about 2003 Grand Marquis

1 Answer

...wire between the ECM/PCM (A22) and the A/F Sensor (Sensor 1). NO - Go to step 15. Check for continuity in the wires between the A/F Sensor and the fuses.Is there continuity? YES - The wires are OK. ...

Question about 2003 Grand Marquis

1 Answer

...wire between 16-pin PCM harness connector "D" and A/T gear position indicator, or A/T gear position switch. Repair as necessary. If Green/Red or White wire is okay, check for loose PCM harness ...

Question about 1999 Cavalier

1 Answer

...cant find a PCM wiring diagram -to locate the wire at the PCM So I can try a jumper wire to see if the Org wire is bad. We do not have any wiring diagrams available for download due to copyright

...wire relay when the PCM turns the drive-by-wire relay on. If the input voltage is less than 5.0 V, the PCM determines that the drive-by-wire relay control circuit voltage is low. Diagnostic support ...

Question about 1998 Integra Type R

1 Answer

Car

wire between PCM and mainshaft speed sensor. If continuity is not present, reconnect mainshaft speed sensor harness connector. Measure resistance between 25-pin PCM harness connector "B", terminals No

Question about 1998 Integra

1 Answer

wire between PCM and mainshaft speed sensor. If continuity is not present, reconnect mainshaft speed sensor harness connector. Measure resistance between 25-pin PCM harness connector "B", terminals No

wire at pin 24 of the PCM, with the key on, to verify power came out of ... 1 Confirmed fix Grounded Crankshaft Position (CKP) Sensor Wiring 1 - Crankshaft Position (CKP) Sensor Wiring Engine will not

PCM fuses. Check the big wire from the alternator to the battery. Check battery clamps. On any of these corrosion could and will cause no charging. After that, you need a wiring schematic. You'll need

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

john h

Level 3 Expert

23818 Answers

Brad Brown

Level 3 Expert

18626 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...