Questions & Answers for: pcb torx screws

Question about nuvi 200W GPS Receiver

1 Answer

...torx screws, right under the S/N plate sticker is a mount hole, locate this then pry apart with screw driver, be careful prying apart as there is a flex cable taped down to your pcb board. Remove the ...

Ad

Question about K800i Cellular Phone

2 Answers

...torx screw and 2 philips screws. the screen is unclipped and the keyboard is attached to the PCB by a flexible cable and socket. Make sure you are grounded and you don't damage any of the plastic ...

Ad

Question about N70 Cellular Phone

1 Answer

...PCB on the display module is damaged, which is not really something that you can repair.- it's possible that the connector is not making proper contact, in which case removing the 6 torx screws, ...

Question about KRZR K1 Cellular Phone

1 Answer

...the battery, memory card and SIM card, take out the 4 torx screws, remove the rear panel, unplug the display flex cable, then remove the main PCB and the keymat. It should only take about 5

Question about MCD990W Microwave Oven

2 Answers

Torx is a star shape, available at auto parts store of Sears (K-mart). Once inside - DO NOT TOUCH THE SILVER CAN - LETHAL. Find the lamp, check it out. If burned, get a replacement at your hardware or

Question about K800i Cellular Phone

1 Answer

torx screws and 2 philips screws. Take the front cover off and the earpiece can be pulled out of the front case (it has 2 gold spring contacts) as it is glued in and replace with the new one. The gold

Question about 6300 Cellular Phone

1 Answer

Torx 6 screwdriver), First remove the battery cover & battery. Remove the two screws you see. Run your fingernail around the join of the front cover and then remove the front cover. Now remove the

Question about 7.2-18.0 Volt One Hour Charger

1 Answer

...torx screws in the underside corners) and check the little glass fuse on the pcb. If either main fuse or glass one is blown you have a problem with the board and it's not worth repairing. If both ...

pcb is quite expensive (around $400 where i live and thats at trade price direct from them) so fingers crossed its the emi filter, you wont know for sure unless you take the top off and check what the

...torx screwdriver? rounded screw holes are not normal. The internet is not helping?? https://www.hddzone.com/blog/fix-western-digital-wd2500bmvs-pcb-board-2060-701499-000 T6/T8 screwdriver available ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top GPS Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66963 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a GPS Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...