...patton insignia removes easily by applying leverage with a screwdriver. There are eight spots (at least on mine) where it clips. Be sure to remove any disposable plastic fastener holding the two ...
Patton Heater And It has A Caution Light on it. It would run for 2 minutes then the caution light would come on then it turn off! to be absolutely certain what is turning on the caution light I'd have
...Patton U2 1887 fan apart to clean the blades and the cage real well and when I put the unit back together, the fan will not work. I just wiped everything down with a damp rag so I didn't get anything ...
...go where when putting back together? (I probably have them wired wrong..help) Patton Floor Fan #12-1887 If it was wired wrong it wouldn't run. I would suspect uneven tightening of the motor
...Patton milkhouse space heater model puh680-u but can't track down web sight to order. MILKHOUSE HEATER "CAUTION LIGHT" SOLUTION: Before I explain, let me clear this myth up: this is NOT an issue with ...
...back together. On others I have found small plastic wire ties holding the two grills together, one at the screw locations where the legs hook onto the fan. These need to be cut with scissors or wire ...
Usually answered in minutes!
1,743 Questions
1,329 Questions
1,410 Questions
1,123 Questions
940 Questions