Questions & Answers for: pathfinder clock

...clock on my 2001 Pathfinder goes on and off, I want to look at the clock wiring after I checked the fuse but I am not able to take it out, can you help on how to do that. Thanks The instructions are ...

clock stopped working in my 2001 pathfinder. what would cause this to happen. sometimes when I bang on the outside case, it comes on, but goes back out again That is a prime example of a clock that is

...clock on my Nissan Pathfinder is acting funny. It goes on and off during normal driving. If I tap on it, it lights up. Help! That is a typical problem with many late model import vehicles. The ...

Pathfinder LE clock runs fast The clock on my 2008 Pathfinder LE seems to have a mind of its own and runs fast to the tune of several minutes/day. Anybody else have the same problem? No solution yet..

clock on 2001 LE Pathfinder I have removal instructions at www.autoclockrepair.com. It is a very simple process. My only tip would be to remove the bezel when it is warmed up. Plastic doesn't break as

...of useful info there. Drop me an email if you have questions, thanks! The clocks in these older Pathfinders are notorious for giving an intermittent or dead display. The clock can be easily ...

...clock in the dash of 2001 pathfinder quit working. can`t find fuse that says clock. I have check all 3 of the fuse panels fuse box under dash ( left side ) fuse # 24 7.5amp and fuse #10 10amp hope ...

...pathfinder. The digital clock keeps fading on and off. Sometimes its lit completely and other times its faded or completely off. What would be the problem? Intermittent activity is a sign that the ...

...clock on a 2000 Nissan Pathfinder? The buttons on the front (h) and (m) should take care of it. If the clock is not displaying anything but the radio and dash lights are OK then it is a dead clock. I ...

clock on dash not workint Check fuse. If fuse OK, then clock is bust. Replace clock. If too expensive or complicated for you to fix, buy cheap small digital stick on clock and stick it over exiting ...