Questions & Answers for: paper wrapped around fuser printer

Question about LaserJet 4250n Printer

1 Answer

...is not a power supply problem change paper type to card stock/thick/letterhead etc to suit then machine will adjust temp to suit.. ie file, print properties paper type. 50.2 fuser error replace

Ad

Question about LaserJet 4250dtn Printer

2 Answers

...Need to know more. Check for the Try relay wich pick ups the paper if it is damaged it showes same error paper jam . Or your paper jam sensor on the fuser side may not be proper check for

Ad

Question about LaserJet 4250n Printer

2 Answers

...fuser is housed in the rear of the printer. It applies heat and pressure to the paper as it exits, melting the toner into the fibers of the paper. Some fusers are remanufactured. If done properly, ...

Question about LaserJet 4250n Printer

1 Answer

...paper wrapped around the fuser roller but the error persisted. The only thing that cleared the error was to replace the fuser. I am not sure why but the fuser was shot after it had the paper wrap ...

Question about LaserJet 2420 Printer

1 Answer

paper wrapped around inside. We recommend calling for service, but worst case is you try yourself and can't get the paper out then you would just order a new fuser. We can get you the fuser. Just call

Question about 4250 Monochrome LaserJet Printer

1 Answer

fuser. Paper settings are for selected for 4 x 6. A maintenance kit was just installed, however jams were happening before the kit was installed. Printer seems to think there is a jam and stops before

...paper wraps around the fuser. Tried new fuser - same problem. Any suggestions? Good old fuser wrap, what a pain. What type of paper are you printing on. Often with full page coverage printing I find ...

...paper is wrapped around fuser roll Take the fuser out of the printer after it has cooled.Turn the gears on the left side of the fuser, this will cause the rollers to turn and you should be able to ...

Question about LaserJet 3015 All-In-One Printer

1 Answer

paper wrapped around fuser When try to print the paper gets jammed and I get a message "Paper Wrapped around fuser". How do I fix? It prints but always gets jammed halfway through and gives ...

Question about 4250 Monochrome LaserJet Printer

1 Answer

...aligned, which could cause the paper to jam just before the fuser. Another possibility is that there is something blocking the paper path in Tray 2, such as a piece of debris or a torn piece of

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

k24674

Level 3 Expert

8093 Answers

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66967 Answers

Are you an Office Equipment & Supplies Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...