...card between the second roller from the left and the paper separator. The paper separator is the 1/2" square rubber pad at the bottom of the roller. Insert and remove the card a few times. Good ...
rubber wheels? The printer works fine if we manually feed/push the paper into the printer. Thanks. Once upon a time . . . This problem was quite common and HP even designed a fixture (mine is history,
...need to clean the rubber paper feed wheels with isopropilic alcohol (tape head cleaner). They become hardened with age and the alcohol softens them again for a while and enables the to grip the
PAPER OK There is a rubber feed roller above the paper. Clean this roller with WD40. Do not spray the roller. Spray a small area on a cotton rag and rub it all over the rubber roller. That will do the
...paper to contact the rubber rollers any ideas???????? for a fix You can try to clean the rollers with alcohol, usually it's just the paper dust and ink that makes them lose traction. With the back ...
Question about Deskjet F335 All-In-One InkJet Printer
...one. What do I do to clear that? open ur printer front cover clean paper pickup roller (black rubber roller) 2.:- then go to printer back cover open clean all (black rubber roller) hope this is ...
Question about Deskjet D2360 InkJet Printer
...rubber rollers of your printer they might be too dirty that causes the improper movement of paper and cause the paper jam..or open the cover of your printer check for the brocken belts .or paper ...
...rubber rolls will contact the paper when the paper is lifted up against them. There should be no paper bunched up behind the access door. If the paper is against the stop at the back of the machine ...
...paper. the roller rubber that is pulling the paper has a problem either it is worn out or not rotating you can have a visual inspection on the paper tray observe whether the rubber is rolling after ...
there was some instances a piece of teared paper or small sediments drop off in there.. if it not, try to check the rubber roller on the paper feeder.. and please check if some springs are dislocated.
Usually answered in minutes!
2,162 Questions
707 Questions
530 Questions
316 Questions
318 Questions