Questions & Answers for: Brother DCP paper rubber

Question about DCP 115C All-In-One InkJet Printer

1 Answer

...rubber of the paperfeeder is stained with paper dust. What you also can try is: take paper tray out. use a sponge with a rough side (to clean very dirty pans) to scratch along the grey rubber and to ...

Ad

Question about DCP-9040CN Laser Printer

1 Answer

...rubber wheels that pick up the paper. It comes from an auto parts store, and is made to apply to the fan and generator belts of automobiles, to stop them from slipping. You may have to reapply it ...

Ad

Question about DCP 130C All-In-One InkJet Printer

1 Answer

...rubber roller that grips and pulls the paper. Photo paper is much smoother so it is harder to get a grip. There should be a adjustment for the thickness of the paper. This will be a little lever that ...

Question about DCP 165C Compact Color Inkjet Multifunction Printer

1 Answer

...cleaned. The dust can also get into other places and you may need to blwo ro vacuum out the printer. Most problems are from the thin cheap paper, the polished rubber rollers, or a damaged paper

Question about DCP-135C Flatbed Digital MFC All-In-One InkJet Printer

1 Answer

...paper to make them brighter tend to stick to the rubber tire making it slick. A damp cloth to wipe the pickup surface of the roller usually works. You can use alcohol too but it may dry the rubber ...

Question about DCP 165C Compact Color Inkjet Multifunction Printer

1 Answer

paper is too smooth for the rubber rollers to grab it. You need to wet the rubber rollers. Ever licked your finger in order to turn a page in a book? Same concept solution here. Remove the paper tray.

Question about DCP-7020 All-In-One Laser Printer

1 Answer

the paper feed at the bottom od the printer does not catch the paper Pull out paper cassette, lift up printer and you see paper feed roller (it is rubber) just clean it with cloth and water or alcohol

Question about DCP-7020 All-In-One Laser Printer

1 Answer

Paper wont feed Pull out paper cassette, lift up printer and you see paper feed roller (it is rubber), just clean it with cloth and water or alcohol. If I help please vote. Good luck.

Question about DCP-7020 All-In-One Laser Printer

1 Answer

...paper level goes down) and has a rubber pad on top, when the rubber pad gets worn and it no longer 'holds' the bottom sheets that are not supposed to feed.You can get these from brother ...

Question about DCP-7020 All-In-One Laser Printer

1 Answer

...paper pickup problem. remove the tray and look for rubber roller in the front.. try to wipe it with wet cloth. if it works, then you have to order and change (or get changed in service center) paper ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...