Questions & Answers for: HP OfficeJet paper roller

...paper up to a roller, then the roller spins and pulls in a page. The most common problem I've seen (and you may be able to watch this on your printer depending on how the paper is stored) is that the ...

HP J6480 My printer keeps displaying that there is no paper when the paper tray is full. Is this a sensor issue and/or which sensor? Solution Step one: Reset the product Without turning the product ...

...roller either became hard or became so smooth that can not pick paper. no worry.... here is the soluton..... Open the back door of the printer.  the four rollers are visible..... Clean them with ...

...paper, try cleaning the front roller. Wipe the roller with a soft lint-free cloth dampened with distilled water. If the problem persists, or the automatic document feeder does not pick up the plain ...

Says Paper Jam But No Paper In It HP Officejet 4110 all-in-one Printer Hi Paper jams can be real or false. The unit may report a paper jam when there is not any jammed paper, however, the solution to ...

hp c7280 says out of paper but isn't Step one: Reset the product Without turning the product off, remove the power cord from the back of the product. Wait 30 seconds and then plug the power cord into ...

"out of paper" error when ther is paper, paper won't feed Hi , Step one: Check the media and print settings While the printer is on, remove the power cord from the back of the printer, wait 30 seconds

...paper feeder roller rotates but does not draw in the paper HP Officejet All in one printer, fax, copier & scanner 7310. Serial No MY66FQ72VF. Top paper feeder roller rotates but does not draw ...

I have a HP LaserJet 1312nfi that is giving me a FALSE paper jam message. I repeat - FALSE PAPER JAM IN BACK DOOR. False false false. I have uninstalled it on my computer and nothing. I have opened it

roller that picks up paper by checking if the rollers is actually spinning when it is trying to pick up the paper. To see what the issue is with gear or roller, try the following: 1. Remove the output