Questions & Answers for: HP LaserJet paper roller

...roller is damaged, has crease's, or covered with black toner, if the paper jams here alott, you probably need a new fuser unit. there is a pm kit available which includes the fuser and rollers, ...

Roller bar jams paper. As the paper passes from the rear through the rollers into the paper receiver, every other page jams, I can manually get the paper through by slightly pushing down on one of the

roller where paper is taken from Hiya, got old laserjet 1320n, printing started fine then got a paper jam where paper is taken from thought i got it all but havent HELP please pl.replace picup roller

...roller as possible, paper dust can accumulate interfering with the operation (pick up roller). Take care to check the guides in the paper tray are aligned correctly for the paper size in use. Put the ...

Paper roller slippage - Needs to be replaced. Order a new one. Clean with water or alcohol in the interim while waiting for replacement. Eliminate all the paper dust. Sometimes works. Part Number: RL1

the angle of the roller & same way insert new one other wise it wont fix..Bee care full while removing roller, paper sensor flag should not distubed(yellow)bee pateince dont do harsh..best of luck

paper feeds. The pickup rollers come in a kit with rollers for tray 1 and tray 2 along with a new transfer roller. The kit is available here: http://www.ccl-la.com/catalog/product_info.php?products_id

...paper jam error. The rollers are very easy to replace, it takes about 20 minutes total. Here is a link to more information about the roller maint kit: ...

...paper tray and look inside the opening the opening to see the rollers on the right hand side. Here is a picture of the rollers. The end of the roller has a little clip to press to release the rollers ...

...rollers Note Always replace the cassette pickup roller and the cassette feed rollers at the same time. Also replace the separation roller (located in the paper cassette) when replacing these ...