...paper its ok. Also can you get rubbers for feed roller at back of printer Thanks Paul Leeds Rollers should be available; you replace the whole roller, not just the rubbers. This is a common problem. ...
Question about PSC 2355 All-In-One InkJet Printer
...paper feed problems such as paper jamming, print slanting, and multiple pages feeding into the all-in-one. Clearing paper jams CAUTION: All paper jams must be removed from the back of the all-in-one ...
feed causes the paper to move off center. Rubbing the rollers with a cloth and rubbing alcohol will clean them. Slightly rubbing the entire roller with a fine abrasive material can help with the paper
Question about DeskJet 5550 InkJet Printer
...I said a little! do the same to the platten ( big roller that feeds the paper. Repaper it and try a test print to see if that fixed it. I belive one of the rollers is slipping tyhat is why it
Question about PIXMA MP830 All-In-One InkJet Printer
...Paper feed Improper paper feeding: - Multi-feeding - Skewed paper feeding - Paper jam - Paper feeding from the ASF - Plain paper - Highest print speed (Custom setting to 5) - In the high temperature ...
Question about MFC-8460N All-In-One Printer
feed. Paper guide too tight so that paper can't lift to the feed roller also a possibility. Sensor above paper stack out of position.. many possibilities. Does it say "No Paper in Tray 1" or "No Paper
Question about OfficeJet 6110 All-In-One InkJet Printer
...paper feed rollers may be dirty. Over time, paper fibers and dust will stick to the rollers and should be removed. Unplug the power cord from the back of the all-in-one and open the front to expose ...
...HOLEMAN Yes, it is possible to be the problem. Most of the time you would replace the whole fixing unit, it could also be the paper feed rollers in the paper tray or the manual feed tray. Good ...
...paper feed kit is the pick up rollers and the transfer rollers. You can thake those out clean them and replace them, but unless you are actually having paper feed issues usually just clean the paper ...
feed channel as much as you can. Sometimes paper dust and such will make one roller slip on the paper and cause it to skew as it feeds. The mechanics are pretty simple, lust look at it closely and you
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions