Questions & Answers for: paper feed does not feed paper

paper feed paper roll consistently "sticks" and will not move even by using "feed" and imprints over previous numbers If the print-out is an 'alien-like' one, the problem is on the sensor of the ...

Feed the paper manually into the printer: Place a sheet of plain A4 paper in the paper feed tray. Move the paper support on the left-hand side to the left end of the paper. Press the paper feed button

Paper feed rolls is rolling over the paper...how to get access to those rolls My paper feed rolls are not clean anymore and would like to clean with 'disolvent'.....but I have no access to them. How ...

paper feed I have used the printer for about 6 months now with no problems. However lately whenever the paper feeder starts to feed in a sheet of paper, the paper skews in one direction and thus jams.

...feed the paper? Does it try to feed the paper? Does it pull the paper is a little and jam? If the machine sees the ADF and it starts to feed the paper but jams --- clean the feed rollers/ tires with ...

...paper feed roller is dirty, paper is not fed properly because the paper feed roller slips. Cleaning the paper feed roller could resolve the paper feeding problem. Please follow the instructions below ...

...paper feed area. This is the same place where you would feed envelopes into the printer/copier. If the unit feeds the paper into the unit and completes the printing cycle, sounds like the main drive ...

paper feed partially out? If it does not, are there paper black scuff marks where the rollers were trying to feed the paper. Can you hear the solenoids feed the paper? If the paper does feed and seems

...the paper from feeding. if it feed from the side bypass but not the cassette, paper feed tire may not be feeding paper or the out of paper sensor maybe keeping paper from reaching paper feed ...

...paper feed roller is not properly connected. Make sure that the paper feed roller is securely connected to the calculator and that the power switch is in the "on" position. If the problem persists, ...