Questions & Answers for: panasonic tv sap mode

...yet the commercials have sound Make sure the TV is not in SAP mode and that the TV speakers are set to "on" in the Audio setup menu. If a cable box is being used, make sure the volume is turned

...Panasonic tv, low def, works fine on almost all channels. One channel is in spanish, one has an npr (radio audio) on the PBS tv channel, several have no sound. None of these problems exist on any of ...

Panasonic SC-PT660 digital in doesn't work The digital in port on the back of the receiver does not work. There is no light coming out of the port. The cord and digital out on the TV work (hooked up ...

...leave tv on pcm. If that doesnt work check to make sure your not in a second audio mode (meaning set is on sap) sometimes a customer will accidentally hit the sap button. Put unit on stereo ...

...Panasonic TV's after 1996 can be set to "Serviceman Mode" with the following remote control sequence: -select the SET-UP icon and select CABLE mode. -select the TIMER icon and set the SLEEP timer for ...

...panasonic TV, has one channel that is speaking in spanish. The main menu mode shows english and it is just the one station. How do I get off of that. go to the menu and turn off the SAP, secondary ...

no sound on some channels Hello:First check you audio setup in your user menu. You may have the audio in SAP mode instead of Stero.

...out tvs thinking it might be the cable run. Replacement tv works fine. Any help or suggestions would be much appreciated. make sure set not set to sap mode as this can blank audio on certain ...

how to get tv stuck off sap my tv is in sap mode Try soap and water.

...the TV's own built-in tuner to watch TV (you're changing channels by using the Panasonic remote for CH up/down), then press the SAP button on the Panasonic TV remote to cycle through the SAP