Questions & Answers for: panasonic projector bulb 1 light

...panasonic pt-ae 900u projector and it is used in a room where we have a wood stove and i am sure it is dirty inside. It got hot and went off several times. It will run for a few minutes now and then ...

...bulb directly from Panasonic. I borrowed her lamp and it powered right up. We then called the online company and they sent us yet another replacement bulb, and I tried it today and it works. It seems ...

bulb, model VT595 and VT470. The lamp will still not work - the power and status light just continue to blink with no illumination I had the same issue, what I figured out was that I never removed the

...light blinks red bulb replaced only 2 months ago Status light blinks red bulb replaced only two months ago? when i turn the power off and on the status light goes green for about 30 secs then beeps ...

...projector went down, the RED light blinked 3 times. As per manual, replaced with NEW BULB. Same issue over again. Thought it may have been a defective bulb, replaced again with NEW BULB, same issue. ...

tv turned off and wont come on. power light blinks 3 times. do you know what this means? Bulb went bad, replace and also clean cooling fans including the ones that are part of the projector assembly.

...1 red blink every 2.5 seconds indicates a cover error-- for this check the lamp cover 2 times red blinks very 2 seconds indicates temperature error. for this let the projector cool off check filters ...

...Panasonic PT-LM2E projector and it will switch on but no light comes out. The previous lamp blew in the projector after around 2000 hrs. The indicators are as follows: 1. Flashing green power light ...

...455wi but its still blinking red Is it just one light blinking red or all 3 blinking red? Be sure to 'reset' the bulb hours. Try another bulb. If it is all 3 lights blinking red then you are

...projector panasonic model pt-lm1e when we input power. red light appear, then nothing even press power button. and small red light from circuit blink several time what is a problem? when inplug power ...