...22 seconds The microwave shuts off. Completely, no beep nothing. When it counts down it will run for 22 second then the screen, lights everything shuts off. I can hit quick cook or the keypad and the ...
panasonic microwave oven NN-S960BC/WC begins to operate then stops after about 30 seconds, no warmth, control panel stays on but program ends. Is it by chance running only 22 seconds before it shuts ...
...microwave runs for three sec then shuts down If the digital programmer circuit / controller does not get a feedback signal from the inverter for a period of 3 seconds, the controller will stop the ...
...microwave comes on. I also hear a buzzing noise that ticks like a clock while its running. Then suddenly it stops working. Sometimes it will run for 30 seconds. Other times it will only run for 2-3 ...
...22 seconds, that means the controller has detected a problem, usually a problem with the inverter or a bad magnetron. Due to the lethal voltages used and produced, I do not recommend that an ...
Question about NN-H765 Microwave Oven
Panasonic microwave runs for 15 or 20 seconds then shuts off If it stops after 22 seconds, that means the controller has detected a problem, usually a problem with the inverter, controller, magnetron,
...runs for 2 seconds, relay clicks, unit goes off. Cook time on display goes off and clock time comes back. Bad upper interlock switch and charred connector If so, see ...
Question about Profile 1.5 Cu. Ft. Mid-Size Microwave - White-on-White
microwave will only run for 21 seconds and then it shuts off. Even if I try to heat something by running it for 21 seconds multiple times, it doesn't get anything warm. I've heard of this is Panasonic
Question about Profile 1.5 Cu. Ft. Mid-Size Microwave - White-on-White
Panasonic microwave oven stoppages: If it stops after 22 seconds, that means the controller has detected a problem, usually a problem with the inverter, controller, magnetron, or a bad connection from
Microwave stops mid cycle Oven runs for 20 to 30 seconds and shuts off. No heating occurs. If it stops at 16 seconds and is a sensor model, it probably has a defective humidity sensor. If it stops ...
Usually answered in minutes!
3,405 Questions
567 Questions
285 Questions
308 Questions
275 Questions