...3410 pacemark not printing correctly Pacemark 3410 was printing as if needed a new print head. Replaced print head but did not correct the issue. only prints the top half of words and sometimes does ...
...pacemark 3410 Pacemark 3410 is printing some type of informational information on a seperate page. Wasting paper! It printsHost nameIp addressUser name If I send it do a different line printer this ...
Pacemark 3410's alarm light comes on and stays on until I turn the printer on and off while holding the select button. I also get the message on the PC that says there is trouble printing to LPT1. All
...Pacemark 3410 NEED Help guys , I am running a wired network to one of these printers using HP JetDirect 300x to connect using TCP/IP connection. it is a fixed port. Problem- On occation it will print ...
theres power but no lights coming on theres power but no light on my oki 3410 printer and ti will run for some time then goes off, and if I remove the cable going to the printer head then switch on ...
...Pacemark 3410 and the alarm light is blinking and will not print. i turn on and off and the alarm light just comes back on. This doesn?t help fix all printers because each situation is different and ...
Question about Pacemark 3410 Matrix Printer
Pacemark 3410 - printer shuts off after 30 seconds Turn printer on, print head moves as well as platten. After about 30 seconds, the printer shuts off. No error lights. Good chance the power supply is
PRINTER ONLY PRINTING PARTIAL LETTERS EVEN AFTER INSTALLING BRAND NEW RIBBON. IT HAS BEEN GETTING PROGRESSIVELY WORSE FOR LAST 6 MONTHS The printing head(s) may need to be cleaned.
Question about Pacemark 3410 Matrix Printer
...Pacemark 3410 off for a planned power outage. When I returned and turned on the printer nothing happened. No lights, no movement, nothing. Power cord is good and all covers are latched. The problem ...
Question about Pacemark 3410 Matrix Printer
...Pacemark 3410 Matrix yes, clear all print jobs in the print queue on the PC. The press "Stop" on the printer. 2. Turn the printer off for 1 minute the restart 3. Shut the PC down and restart. This ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions