Questions & Answers for: Cobra pa 12

...12, 15&16 and 19&20. Channels 23, 24, & 25 will read 23=27.2550, 24=27.2350, 27.2450 then things straighten out with ch. 26=27.2650 ---40=27.4050. When there were only 23 U.S. channels, ...

pa works the and antenna is fine checked with a good radio also lite works Hi and welcome to FixYa, Initially, pls check the final and pre-final (TR15 & 15) and that it gets modulated TX+12 through D8

12 o'clock position Squelch knob full counter clockwise RF gain knob full clockwise Pa/CB switch to CB Mic plugged in Check coax and antenna connections. Make sure your antenna gommet/insulator is

...12 volts is not present then you have power supply problems that are internal. The conclusion I have made is based on no rx audio, ( could have been the jack at the pa and ext spkr) but you say they ...

...12 o'clock Squelch full counter clockwise Rf gain full clockwise Select S/RF position on the SWR/CAL switch Select AM position on the USB/AM/LSB switch Select CB on the CB/PA switchNow there will ...

...PA 17294- ...... lock onto the 19 -kHz pilot sub- ...... manually reset.using fgets to read one line at a time - Experts Exchange www.experts-exchange.com > Questions Nov 11, 2008 - 1: 2: 3: 4: 5: 6: ...

...12, 15 & 16 and 19 & 20 that legal CB's can NOT access. My Maxon in band "A" is 26.515 to 26.955 MHz, Band "B" is 26.965 to 27.405 MHz and band "C" is 27.415 to 27.855 MHz. CB radio can still ...