Questions & Answers for: Plymouth oxygen sensor dodge neon

...The ABS hasn't worked for a long time but I would like to get it fixed. Is there a sensor that could be causing this not to work. there are abs sensors your best bet is to take it to a dodge ...

Ad

...oxygen sensor, but still having this problem. Car doesn't run well, it jerks when driving. If good, clean fuel, good spark etc. 171 is lean mixture according to my sources.. Thus I'd say if engine is ...

Ad

...DRIVER SIDE OF THE HEAD JUST IN FRONT OF THE CAMSHAFT SENSOR. CLEAN ENGINE AREA FIRST (recommended) CHECK THIS WEBSITE FOR EXCELLENT PICTURES: ...

...oxygen sensor cause this? Generally no. Oxygen sensors usually work or they dont . If it was worn out usually you would see a change in fuel consumption. It most probably is something being affected ...

Question about 1999 Neon

1 Answer

...oxygen sensors,but the code keeps telling me there is no activty on the downstream sensor,have checked all the connections,but don't know where to look next if it is a trouble code for the downstream ...

Question about 1999 Neon

1 Answer

...1 Lean Fuel System Rich.Possible causes- Faulty front heated oxygen sensor - Ignition misfiring - Faulty fuel injectors - Exhaust gas leaks - Incorrect fuel pressure - Faulty Mass Air Flow (MAF) ...

Question about 1996 Neon

1 Answer

...know where to start. Thanks in advance. You cannot have even the slightest exhaust leak between the engine and the oxygen sensors or you will see this code.Also make sure the air flow sensor is

...the filter it is blocked or restricted -replace. hope that helps . Nazeer Troubleshooting O2 Sensor Codes: http://youtu.be/7hUrMdzODYU How to diagnose / Test oxygen sensor ...

Question about 2000 Neon

2 Answers

...OXYGEN SENSOR IS PLUG IN, IF IT IS , MAKE SURE THAT NO WIRES ARE BROKEN, IF THEY ARE REPAIR WIRE, IF NOT REPLACE REAR OXYGEN SENSOR, RESET LIGHT. DONE bjr, jai le code 139.140.141 jai changer deux ...

...sensor on a 2002 dodge neon? I`m going to assume you know where the tps is, disconnect the wiring plug from the sensor, there are 2 screws(bolts) that hold the sensor to the throttle body, remove ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...