Questions & Answers for: Whirlpool overload

installing new over load relay replaceing the overload relay on the compressor new one is a kit P# 4387535 The line voltage goes to the overload and the neutral(and capacitor lines if it has one) goes

...Thank you. Nick and Kathya thatss what it sounds like to me the motor simply turned off on overload( giving that electrical, almost burnt rubber smell.) either that or it was overloaded as ...

...stopped working after a paper plate caught fire inside. I replaced the wiring going to the thermal overload and the thermal overload but it still doesn't work unless I jumper the overload? Is it ...

25 year old Whirlpool side by side fridge not cooling. Thermostat OK, both fans running, relay OK, overload protector stays closed 10 seconds or so then kicks out for a minute or so then closes again ...

compressor is not turning on. anything I can check before i call a repair man? Yes, your overload relays have gone bad at the compressor. Install new overload kit and you will be fine.Hope this helped

has stopped making ice and making a clicking noise sounds like your ptc overload relay on the compressor is weak or the compressor is beginning to lock up and drawing too much current and kicking out ...

NOT COOLING ....CLICKING SOUND FROM COMPRESSOR Compressor Start Relay/Overload or Compressor is bad. A bad compressor can cause Start Relay/Overload to go bad but the only way to know is to replace ...

I overloaded washer and now it won't go past the wash cycle I overloaded the washer and now it won't rince, spin or do anything but wash Can You Help? most likly cause is a broken/loose belt.adrian,,,

...socket power is all ok, is there an internal fuse or thermal reset within the dryer There are some overload/temperature switches within the dryer. Most reset when the overload/temp gone. You could ...

...6300sw1 won't aggitate and gives ol code won't aggitate, skips to spin and flashes ol at end It is overload error. "oL" (Over Load) Is the washer overloaded? The washer has attempted to fill • and ...