Questions & Answers for: overdrive button short

...overdrive button but it doesn't seem to be working. I bought it with the Overdrive handle / button missing so I went to the junk yard and replaced it with an identical one. I can't tell if it's ...

...overdrive. Could be as simple as a fuse. Look in your owner's manual. Sirwriter There is a overdrive button that turns it off and on. You may find it on the gearshift knob and activated it by

...celica isn't dropping down to overdrive, have replaced the tranny and still the same problem Have you checked to see if it is an electronic problem? Possibly a short in the wire connecting the

...the valvebody. If you have the overdrive button in the gear shift handle than check the switch and wires going down to the steering colum. However it is more than likely the solinoid is shorting

OVERDRIVE BUTTON IS RELEASED OVERDRIVE DOES NOT ENGAGE. SUGGESTION IS A PROBLEM WITH THE CONTROL UNIT (COMPUTOR) REF MC896944 31036 AS181. THIS STARTED AS A PROBLEM OF DROPPING IN AND OUT OF OVERDRIVE

...wont work why? Your overdrive button probably is broken and so it wont engage or there might be a short. the best solution is to go to u pull and pay they sell stuff dirt cheap, ...

overdrive button you can push to manually engage the overdrive? Some ford vans and heavy duty trucks have a button to push for manual operation. If so, you may want to inspect that 

overdrive button is located on the left side of the shifter, and your wife spilled water on the shifter, the water has likely caused an electrical short. With the ignition key off, try using

...button type overdrive transmission The short answer, yes. M46 models with the type J or P overdrive (depending on year and market) require a certain level of oil in the overdrive. Additionally, the ...

...an overdrive switch? Maybe that is shorted out, or on. I don't know if your model has the lever and you select no overdrive with the shifter, but some cars also have a button to turn overdrive