Questions & Answers for: oven probe

Ad

Question about JKP27 Electric Double Oven

1 Answer

...oven a probe is sticking out from the back wall. Is this normal? I can't remember if it was there before. In the bottom oven, there is long probe type thing that seems to be loose and it gets in the ...

Ad

Question about JKP27 Electric Double Oven

1 Answer

...probe (oven temperature sensor) terminals at the EOC (electronic oven control) plug. It will be about 1100 Ohms at the room temperature. If the resistance at the EOC plug is wrong, then measure the ...

Ad

Question about Epicure EO230 Stainless Steel Oven

3 Answers

...oven connection end of meat probe is clean and no food, moisture or other substance in is the meat probe socket. 2) Call for service. how do I clear the U80 fail code? My oven was brand new and I ...

Question about Profile JT952 Electric Double Oven

1 Answer

...Oven probe. Need advic I need directions on how to use the probe for my GE oven probe. I need oven probe instruction and oven conversion time with the convection oven for cooking a forty pound

Question about Architect Series KEMC308KSS Electric Double Oven

2 Answers

...probe and jack (in oven cavity). 4. Check connection between jack and harness (in rear of oven). It sounds like the probe jack may be bad or the wiring between the jack and the control board above. ...

Question about 79012 / 79014 / 79019 Gas Kitchen Range

1 Answer

...probe (aka oven temperature sensor) terminals at the EOC (electronic oven control) plug. It suppose to be about 1100 Ohms at the room temperature. If the resistance at the EOC plug is wrong, then ...

Question about 79012 / 79014 / 79019 Gas Kitchen Range

1 Answer

...probe (aka oven temperature sensor) terminals at the EOC (electronic oven control) plug. It suppose to be about 1100 Ohms at the room temperature. If the resistance at the EOC plug is wrong, then ...

Question about 79012 / 79014 / 79019 Gas Kitchen Range

2 Answers

...probe (aka oven temperature sensor) terminals at the EOC (electronic oven control) plug.It suppose to be about 1100 Ohms at the room temperature.If the resistance at the EOC plug is wrong, then ...

...probe (aka oven temperature sensor) terminals at the EOC (electronic oven control) plug.It suppose to be about 1100 Ohms at the room temperature.If the resistance at the EOC plug is wrong, then ...

Question about Profile JT912 Electric Single Oven

1 Answer

...oven, plugging the probe into the socket. I shut the door and the word "probe" never came on the screen blinking like it usually does so I can then set the probe temp. I tried pushing the ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Ovens Experts

Marvin
Marvin

Level 3 Expert

85231 Answers

Cindy Wells

Level 3 Expert

6082 Answers

Brad Brown

Level 3 Expert

18226 Answers

Are you an Ovens Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...