Questions & Answers for: Philips outputs

tv set won't start up power suply only gives 40 vdc at main output then shuts off, I try changing power reg. STRS6656, no change, I checked all resistors and capacitors on the power supply area and ...

dead unit no picture no sound the power supply voltage is 50v+ and 50v- your problem is that your output is less than normal first you isolate h/output from power supply if it comes to normal(115V). ...

dvp 320 no composite video output i have video output available on the rca output jack, can i have schematic diagram for this particular model, audio output and power supply seems to work fine.. CHEEK

No power whatever Check voltage output of the power supply. If below the indicated voltage on the output terminals, replace the capacitors across the output terminals with the same specifications. If ...

...this system have a optical input Here are the list of connections on this system ? Audio inputs/outputs 2 analogue input sources, 1 analogue output connection - TV : in - VCR : in - CDR : out - ...

...red output transistor or the Ic if used at that stage. If a single Ic is used in your TV as R_G_B outputs, replce the same. If three Ics are there, replace the red output control Ic. ok If you have ...

...connect an output to an output and expect good results. It has both optical and coaxial digital outputs but just a coaxial digital INput. ...

...your PC's Sound Controls and enable the applicable input. make sure the volumes of both Inputs and Outputs are turned up. Though not applicable to theGemini, more-advanced sound cards and audio ...

Why is there no sound? hello,the most common problem with these devices is,1 of 2 culprits, either you have 'DRY' solder on output terminals (within the device)or the main sound output chip's are ...

I have a Philips soundbar that I have hooked up to my flat screen tv using audio (red,white) cables directly from soundbar to tv and there is no sound coming out. Ive hooked it from soundbar to ...