Questions & Answers for: Lexmark C output bin

The sheets being printed are gray instead of white, like the ink is all over them. I seem to have just solved this problem on my C522. On the back of the transfer belt assembly there is a black ...

your power supply with a volt meter. If there is a transformer, check the transformer for its rated output. If there is no power at the end of the cord/wire, you will have to replace the cord/wire

printer is requesting remove paper/standard bin This means the flag in the output bin got stuck or there is some dirt in the sensor of this flag.

We are having issues with our C534n Printer. It is showing waste toner is full. How do we find this and correct the action? as you look at the printer from the front, on the lkeft hand side there is a

output (exit) bin is full. Remove the stack of paper from the output (exit) bin, and then press . Specified tray is empty. Load media in the tray. Wrong printer software is installed. ? Verify you are

My printer is displaying the following message - 122.03 Service Fuser Error. Can you tell me what this means? This means the fuser unit is defective and needs to be replaced. Depending on your ...

...or so a single sheet of paper will come out printed but will crunch up as it is feeding to the output tray. Nothing seems to be blocking it because not every page does it. If you are getting ...

...may occur after the replacement of a supply item or the clearing of a paper jam. If your printed output resembles the example shown, please do the following: Print the Menu Settings page to check ...

I get error message "waste I get error message "waste toner box full -82". What do I do? I cannot find any waste toner box - have no idea where to look or what to do. Open the right side ...

output bin full error flag broke You need to replace the Output Bin Flag. Please call our Technical Support Hotline on 1-800-539-6275 or contact an Authorized Service Provider near to you (click ...