Optra S2455 output bin control I need to find the commands to control the output to the three output bins on this printer....Can you email me at [email protected]. Thanks. Vince I used the
...two sheets of paper from the paper tray resulting in blank sheets of paper between the printed output. Are there any adjustments on the paper tray or the mechanism in the printer to prevent it ...
Question about Optra T614 Laser Printer
...remove the fuser cover located in the top cover right below where the paper comes out to the output bin. with a flashlight inspect the fusers hotroll. a worn fuser can cause these lines that ...
...full Can you please help. what is this mean? It appears that this means that the printer thinks the output tray (on top of the printer) is full. If it is not, then the signal arm may be out of place. ...
...of this printer. The LED readout on the printer sees the tray but when I go to Word to choose the output tray it remains greyed out? Ive rebooted both the printer and the machine with no success. ...
...cover toresume printing. If the paper jam occurs inside the printer, remove the paper from the output bin. Turn the printeroff, then on. If this doesn't clear the jam, open the printer ...
...printer and the options. The path varies depending on the paper source and paper exit selection (output bin). The jam areas are also shown on the pages. For further assistance, please contact ...
Usually answered in minutes!
62 Questions
52 Questions
36 Questions
38 Questions
17 Questions
