...outlook uses Internet Explorer's print settings. You can adjust the print settings in IE to effect the email formatting when you print, but I found it easier to just switch the mail format. To solve ...
Question about 170XiIIIPlus Thermal Label Printer
...print is aligned, id so, use the top of form setttings to get all the print on the label. As far as a USB, the printer will only take RS232-422,485, and parallel, and you can add the factory Nic card ...
...top half or the bottom half. Or the printout is totally unclear in the top half of page and progressively becomes a little clearer. However, characters are still partially cut. Adjust the printing ...
oe 6 prints email omitting first character and a half on each line which printer it is if it dot matrix, change the rebbion or it may be head problem if it is not dot matrix see encoder, catrage ...
...print from Outlook Express - Internet Exp. since installing IE8 provided by yahoo, i can`t print from outlook express or IE8everything else prints fine I have the same problem. If I try to print an ...
Question about Stylus Photo 925 InkJet Printer
...top-bottom), or left and right. If just left half page, set page setup as actually paper wide that inserted. because, if actually paper wide is smaller than page setup, some epson printer jsut print ...
Question about Office Outlook 2003 for PC
half first letter. I have properly checked all printing settings in outlook as well as on printer side- nothing unusual- all margins set to 1.3cm format A4 etc.- usual stuff. Problem is occurring just
Question about PhotoSmart C4480 All-in-One Printer InkJet
...Outlook, double click to open the message and then select File->Print (don't use the print icon directly from the toolbar). Then, on the print dialog click Preferences, and see if the paper is set ...
...print top half yellow - bottom half black!? Help It sounds like your black (K) or Black/Yellow (KY) head needs to be replaced. The problem appears to be in the top half of the black head. Without ...
...top half is printed but not the bottom half (Or the other way around) it could be an air bubble in the feed line which can be cleared with a printhead clean or two. Printing half a line rather than a ...
Usually answered in minutes!
19,138 Questions
12,216 Questions
7,310 Questions
7,277 Questions
5,472 Questions