Questions & Answers for: Pass & Seymour outlet wiring

How do I install a Pass & Seymour Nightlight/ Outlet? I used to have one regular outlet with 2 receptacles and two sets of hot & neutral wires. When I attempted to install the NIghtlight/ ...

Need to find out how to hook up a toggle switch/outlet Im replacing a light switch with a combo switch outlet. I only have a black and white wire . How do i hook this up You can't, not without running

...outlet for counter top appliances. Which wiring diagram should I use and what do I do with the two black wires that are attached to the switch? If the wires are coming out of the switch portion & ...

I to want replace a regular duplex outlet with a TM818-WCC6 and want just the outlet switched. How do I wire it? The Pass and Seymour plug-switch combo has 3 screws There is a dark screw on one side .

I have the 691tr-icc6 outlet/toggle. I would like the switch to control the outlet below it. So I can turn on and off the outlet as needed. , Where do I put the black and white wires that come to the ...

...wiring inside outlet box, code says Black wires are Hot and go to brass screws, White wires are neutral and go to silver screws. Older wiring could be very different especially if wiring was not done ...

I am replacing an existing switch/single outlet, the outlet was always live.the switch controlled a light. the existing sw was very old and only has connections on the back top.. The left had 2 white ...

...light up. If box does not have neutrals, then device cannot be installed to code. Open following link for illustration of wiring: ...

I want to replace a standard duplex outlet with a switched combo outlet and only want the switch to turn the outlet on and off. I currently have 2 black wires, 2 white wires and a ground. The new ...

...hot in wall even when light is not on This is fire hazard. Call electrician. What is plugged into outlet? Are wire and breaker sized correctly? Do you have aluminum wire?