Questions & Answers for: oster clippers cutting

...I dont know what model you have, but if you need schematics for YOUR model see this link. ...

clippers I can`t work. Thank you!!!! This is from the Oster book: Changing Blades To Remove: IMPORTANT- stop motor; push latch with thumb while lifting blade away from clipper and slide off tongue. To

...clippers. Instead use OSTER KOOL-LUBE. We were told the blades become to hot with regular lubricating oil such as 3 & 1. We bought some KOOL-LUBE from our neighborhood PetsMart and it corrected ...

...i have changed the lades 3 times and will not cut Are you sure you have Andis A5 or did you mean Oster A5 Clipper, if this clipper is A5 Clipper, You need to check the Lever for wear, The front of ...

...oster clippers and a whal that were acquired used. they have stopped cutting well with combs attached. i can cut very close but withe combesthey seem to clog . if the problem arrears to be with one ...

Oster Golden A5 Clippers will not cut My blade #10 cuts sporadically , motor keeps going but it will not cut I try to clean and oil and still does not cut ...this clippers have only have been use like

...clippers. Oster blade # 10 also rocks side to side as does the Andis blade..Should that be happening? Check the two screws either side of the hinge assembly make sure they are tight, the problem ...

Oster A5 clippers blades stop moving when put into the horses hair. checked without the blades, everything moves fine. Put new blades on, cleaned the silicone off with blade washed and have lubricated

Oster clippers will not cut any hair at all. Never have. Bought new at Walmart. Tried before bath, after bath, every adjustment, oiling. Everything I can think of. $45.00 and WILL NOT CUT! HELP! There

...clippers , which may cause problems. These are links to 2 ...