Questions & Answers for: orientation sensor

The picture orientation is not accurate. What should I do? Set the Orientation Sensor to ON

Orientation sensor got stuck A95 has orientation sensor. In my camera it got stuck. If I slap it several times it detects correct orientation and got stuck again. Defective mechanism, a stucked ...

sensor orientation through a little trial and error. But by going through this trial and error, I also had my Eureka moment when I realized that the original sensor probably would also work if it were

...orientation of the sensor connection between the control board and sensor is correct. it's hard to know which way the sensor should be connected because the control board has three prongs and the ...

...orientation of the sensor connection between the control board and sensor is correct. it's hard to know which way the sensor should be connected because the control board has three prongs and the ...

...orientation of the sensor connection between the control board and sensor is correct. it's hard to know which way the sensor should be connected because the control board has three prongs and the ...

sensor orientation through a little trial and error. But by going through this trial and error, I also had my Eureka moment when I realized that the original sensor probably would also work if it were

sensor orientation through a little trial and error. But by going through this trial and error, I also had my Eureka moment when I realized that the original sensor probably would also work if it were

...orientation sensor. The monitor supports a "MagicRotation" feature, which automatically switches between portrait and landscape mode when the screen is rotated. I think the part you damaged is a ...

...defective or incorrect sensor, sensor wiring connector problem (bent or corroded pins), improper installation (wrong orientation, not seated properly), etc. Why did you replace it in the first