Questions & Answers for: optoma lamp fail

Question about MovieTime DV10 Multimedia Projector

1 Answer

Optoma MovieTime: The Lamp that Won't stay on A few months ago, the lamp 'popped' and the projector shut down. I assumed the lamp was gone, but it came back on (after sitting for a while). When I ...

Ad

Question about HD72 Multimedia Projector

1 Answer

...optoma hd70. with 610 hrs of lamp usage. the projector works for around 60 mins. then the lamp flickers and lamp fails. after power reset it work again for another 20 min. and so on. If i switch off ...

Ad

...lamp fail comes on (tested lamp in another projector), powers down and enters normal flashing green state. I suspect the lamp supply. any comments? The lamp might be burn out or you do ot have the ...

Optoma DS303 Projector and it won't turn on. The power button flashes when i hold it down. How old is the projector?? First, unplug the unit and check the lamp--A healthy lamp should have clear glass-

...Optoma Hd70 and it keeps turning off after about a 1 min and the temperature indication is blinking red. Is there an airfilter I can clean or something? Sounds like there is a overheat sensor failed ...

Question about H30 Multimedia Projector

1 Answer

...lamp will fail soon replace" warning When you replace the lamp, you need to reset the lamp counter as well. The procedure for this should be in the owner's manual. This counter is a guide only. Lamps ...

Question about H30 Multimedia Projector

1 Answer

...OPTOMA PROJECTOR the standby light keep on blinking. Hi This is either because the lamp has failed or the machine is overheating because the filters are blocked and not enough air flow is being ...

Question about DLP Projector Multimedia Projector

1 Answer

...Optoma GT720 Projector.. its been up and running now since July of this year... for some reason now the lamp wont come on , everything else starts up but after the fan stops I get the Lamp Failed ...

Question about HD20 DLP Projector

2 Answers

...Lamp fail led goes solid red. I had a similar problem with optoma hd180 dlp projector. I sent it back to optoma. They want to charge 400$ to change PCBA MAIN BOARD MODULE FOR 8EG. This projector is ...

Question about HD20 DLP Projector

1 Answer

lamp on my Optoma H65 went to end of life and failed last week. I got another, installed it and reassembled. When i turn it on, i hear clicking, but lamp does not come on. Anything else i should check

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

k24674

Level 3 Expert

8093 Answers

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66931 Answers

Are you an Office Equipment & Supplies Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...