Questions & Answers for: optoma fan fail

...fan? Are their repair options other than sending it to Optoma? its definitly a cooling issue.the temp sensor is working because it shuts the unit down.when a lamp goes it goes just like a light ...

...fan fail error what can I do? my optima will run but lately ive been getting a fan fail message and then it turns off if I let it cool off and turn it back on it works but this fail message is ...

only power light will power on for few seconds then flashes. plug in turn on main power switch and standby power light flashes. Then press power button and power light will burn solid for a few ...

...Optoma ep716 and when I turn it on it makes a continuous very loud vibration noise. The logo display very nicely the picture is perfect. The noise sounds like the fan is hitting against something and ...

optoma ezpro 610h projector displays "Fan fail!after 1 hour of use, i hear clicking. over heating and/or bad fan. if the fan stops or slows down, replace it. try www.projectordoctor.com

...optoma projector dlp in ds309 2 red light flash be sure to reset the lamp hrs, always a good idea to reflash with current flashware because your firmware can get corrupt over time. next step if to ...

...Optoma GT720 Projector.. its been up and running now since July of this year... for some reason now the lamp wont come on , everything else starts up but after the fan stops I get the Lamp Failed ...

Lamp won't light The lamp on my Optoma H65 went to end of life and failed last week. I got another, installed it and reassembled. When i turn it on, i hear clicking, but lamp does not come on. ...

Optoma HD20 has no power, no lights. Only 1 year old. Help! Projector fails to turn on. No power, no lights, no fan noise. have you tried the internal fuse

...Optoma logo but will not boot to the home screen. A little fan appeared while in use it shut down and hasn't loaded the home screen since. Both fans are working. Depends on the model. If you saw a ...